Pressure Blaster – PB Machine
There Are Basically Three Established Methods Of Abrasive Blasting I.e. Induction – Suction (Supper Blaster), Director Pressure (Pressure Blaster) And Slurry Pumping (Wet Blaster).
Abrasive Capacity
150 Kg (Metallic) / 65 Kg (Sand)
Compressed Air Required
45 CFM @ 80 PSI
--- Technical Data
Specifications
The Portable Abrasive Blaster P7 is widely used for industrial cleaning, surface preparation, and finishing operations across multiple industries.
|
PRESSURE BLASTER (PB) |
MODEL |
PB-9182 |
PB-12090 |
PB-150120 |
|---|---|---|---|
|
Working Chamber mm |
|||
|
Height A |
775 |
900 |
900 |
|
Width B |
910 |
1200 |
1500 |
|
Depth C |
820 |
900 |
1200 |
|
Door Opening mm |
|||
|
Width G |
730 |
800 |
1100 |
|
Height H |
675 |
800 |
800 |
|
Overall Dimension mm |
|||
|
Height D |
2130 |
2030 |
2080 |
|
Width |
1100 |
1365 |
1665 |
|
Depth P |
2500 |
2430 |
2730 |
|
Dust or Mist Collector or Reclaimer Fan Motor |
|||
|
Fan Motor HP |
1.0 |
1.0 |
1.5 |
|
Fan Capacity (M³/Min) |
14.16 |
14.16 |
22.66 |
|
Fan Capacity (CFM) |
500 |
500 |
800 |
|
Filter Cloth Area (M²) |
7.5 |
7.5 |
10.0 |
|
Slurry Pump Motor (HP) |
---- |
---- |
---- |
|
Airjet Orifice mm |
---- |
---- |
---- |
|
Blast Nozzle mm |
*5,6 |
*5,6 |
*5,6 |
|
Abrasive Storage Capacity |
|||
|
Litres (CFT) |
28(1.0) |
42(1.5) |
42(1.5) |
|
Pit Size mm |
|||
|
Width |
---- |
600 |
900 |
|
Length |
---- |
2180 |
2530 |
|
Depth |
---- |
510 |
600 |
|
Weight in Kg (approx.) |
580 |
650 |
760 |
|
Abrasive Feed |
Direct Pressure |
- * The size supplied unless other wise specified. All motors used are 415V/3P/50Hz. specifications are for guidance & subject to change without notice.
- Works on DIRECT PRESSURE principle of blasting, the pressure blaster produces high abrasive velocity resulting to cleaning of job at faster rate. A pressure vessel directly bolted below hopper of cabinet has automatic abrasive refilling arrangement. A tubular fabric bag type dust collector with generous filter area is attached with cabinet as standard feature for high efficiency of dust collection. A manual shaker is also provided for bag shaking. PB is recommended for fast cleaning, for removal of heavy rust and corrsion using coarse abrasive, it is most suitable for etching the surface needed for rubber-lining, FRP lining and metal spaying. Castings and forgings are cleaned speedily. Blast pressure can be controlled from 30 to 90 psig. Almost all types of coarse and medium size abrasives can be used depending upon application.
--- Options available on request
- Motorised bag shaking arrangement.
- Reversejet cartridge filter dust collector.
- Higher output Blast Gun in place of standard.
- Foot operated treadle switch for blasting ON/OFF.
- Fitted with optional accessories.
Custom Engineering
Configurations tailored to your component size, material, and surface-finish targets.
Quality Tested
Pre-dispatch performance checks for blasting efficiency, safety, and reliability.
Export Ready
Documentation and logistics support for domestic and international shipments.
Dedicated Support
Technical guidance for installation, operation, spares, and maintenance.
- FAQs
Frequently asked questions
Answers about this machine, installation, and support.
The PRESSURE BLASTER (PB) is a direct-pressure abrasive blasting cabinet designed for high-speed surface cleaning, rust removal, and heavy-duty surface preparation using compressed air and abrasive media.
The machine operates on the Direct Pressure principle, where abrasive is fed from a pressure vessel directly to the blast nozzle, producing high abrasive velocity for faster and more efficient blasting.
It is ideal for heavy rust removal, corrosion cleaning, paint stripping, scale removal, surface etching, casting and forging cleaning, and surface preparation before coating or lining.
The machine is widely used in steel fabrication, foundries, shipbuilding, automotive, oil & gas, heavy engineering, rubber lining, FRP lining, and metal spraying industries.
The PRESSURE BLASTER supports most coarse and medium-sized abrasive media, allowing users to select the appropriate abrasive based on the application and desired surface finish.
The PRESSURE BLASTER is available in PB-9182, PB-12090, and PB-150120, offering different cabinet sizes for small, medium, and large components.
Yes. The machine allows the blast pressure to be adjusted from 30 to 90 PSIG, providing precise control for different cleaning and surface preparation requirements.
The standard machine includes a tubular fabric bag-type dust collector with a manual bag shaker, ensuring efficient dust extraction and a cleaner working environment.
Optional accessories include motorized bag shaking, reverse-jet cartridge filter dust collector, higher-output blast gun, foot-operated treadle switch, and other customized accessories.
The PRESSURE BLASTER delivers high blasting speed, powerful cleaning performance, adjustable pressure control, efficient dust collection, and reliable operation, making it the preferred solution for demanding industrial surface preparation and heavy-duty cleaning applications.
Need help choosing?
- +91-0291-2740609
- [email protected]
- Mon – Sat · 9:00 AM – 7:00 PM
- Similar Machines
Related products
Explore more machines from the same surface-preparation category.
Start Your Project with MEC SHOT
Share your requirements with our team and get expert guidance tailored to your industry and application.