WET Blaster – WB Machine

Portable AbrasiveISO 9001:2015Factory DirectLifetime Support

There Are Basically Three Established Methods Of Abrasive Blasting I.e. Induction – Suction (Supper Blaster), Director Pressure (Pressure Blaster) And Slurry Pumping (Wet Blaster).

Abrasive Capacity

150 Kg (Metallic) / 65 Kg (Sand)

Compressed Air Required

45 CFM @ 80 PSI

Request a Quote

--- Technical Data

Specifications

The Portable Abrasive Blaster P7 is widely used for industrial cleaning, surface preparation, and finishing operations across multiple industries.

WET BLASTER (WB)
	MODEL	WB-9182	WB-12090
	Working Chamber mm
	Height A	775	900
	Width B	900	1200
	Depth C	820	900
	Door Opening mm
	Width G	730	800
	Height H	675	800
	Overall Dimension mm
Height D	1940	2235
Width	1070	1365
Depth P	1500	1700
Dust or Mist Collector or Reclaimer Fan Motor
Fan Motor HP	0.5	1.0
Fan Capacity (M³/Min)	5.66	11.32
Fan Capacity (CFM)	200	400
Filter Cloth Area (M²)	----	----
Slurry Pump Motor (HP)	1.0	1.0
Airjet Orifice mm	*3,4,5.5	*3,4,5.5
Blast Nozzle mm	*8,10,12	*8,10,12
Abrasive Storage Capacity
Litres (CFT)	42(1.5)	42(1.5)
Pit Size mm
Width	----	----
Length	----	----
Depth	----	----
Weight in Kg (approx.)	400	525
Abrasive Feed	Glandless Pump

WET BLASTER - WB

Works on INDUCTION-SUCTION principle of blasting. The most important point in wet blasting is its ability to use very fine abrasive - as fine as 5 microns. Fine abrasive particles are suspended in liquid, usually water and then pumped to a nozzle as a slurry. At nozzle, the slurry is introduced into air-stream and propelled against job. The glandless slurry pump is used to feed the slurry at positive pressure into blast gun. The wetted parts of pump are of thermoset plastic material for corrosion resistance. WB machine is useful in tool room to remove feather burrs from multitooth cutting tools, such as, milling cutters, holes, broaches and taps eliminating hours of handhoning time. It deburrs intersecting holes in precision parts which are inaccessible by any other method. The finest machined surface can be super-finished without damage to sharp edges and exact tolerances.

Frequently asked questions

Answers about this machine, installation, and support.

What is the WET BLASTER (WB)?

The WET BLASTER (WB) is a slurry blasting machine that uses the Induction-Suction principle. It mixes fine abrasive with water to create a slurry, producing a smooth, controlled blasting process for precision surface finishing.

How does the WET BLASTER work?

The machine suspends abrasive particles in water and pumps the slurry through a glandless slurry pump. At the blast nozzle, compressed air accelerates the slurry onto the workpiece, delivering effective cleaning and finishing with minimal surface damage.

What are the main applications of the WET BLASTER?

It is ideal for precision deburring, feather burr removal, surface cleaning, polishing, super-finishing, intersecting hole deburring, and preparing delicate components without affecting critical dimensions.

Which industries use the WET BLASTER?

The machine is widely used in tool rooms, die and mould manufacturing, aerospace, automotive, medical device manufacturing, precision engineering, and metalworking industries.

What are the advantages of wet blasting over dry blasting?

Wet blasting produces less dust, finer surface finishes, reduced heat generation, minimal abrasive embedding, and better protection of sharp edges and precision tolerances.

What type of abrasives can be used?

The WET BLASTER can use very fine abrasives, including particles as small as 5 microns, making it suitable for high-precision finishing applications.

What models are available in the WET BLASTER range?

The WET BLASTER is available in WB-9182 and WB-12090, providing different cabinet sizes to accommodate various component dimensions and production requirements.

Can the WET BLASTER be customized?

Yes. Optional features include a higher-capacity slurry pump, higher-output blast gun, foot-operated treadle switch for ON/OFF control, and other application-specific accessories.

Is the slurry pump corrosion resistant?

Yes. The machine features a glandless slurry pump with thermoset plastic wetted parts, providing excellent corrosion resistance and reliable performance in wet blasting applications.

Why choose the WET BLASTER for precision finishing?

The WET BLASTER delivers uniform surface finishes, excellent burr removal, minimal dust, reduced manual finishing time, and superior protection of delicate components, making it an ideal solution for precision manufacturing.