Indexing Hanger
Indexing Hanger “MECSHOT” has a range of Airless Shot Blasting Machine Hanger Type with number of Blast Wheels varying according to the job size for the wide variety of work pieces for large production output in terms of surface treatment. The overhead conveyor or indexed on hanger carries the job in & out of the blast cabinet where numbers of blast wheel, depend upon the type of the job for attaining homogeneous finish.
Major parts of the machine include blast wheel for giving high production output, over head conveyor for job conveying & the media recovery, consist of bucket elevator, screw conveyor, rotary screen separator etc. & pleated bag reverse jet type dust collector. MECSHOT has recently designed manufactured, Installed & Commissioned Airless Blasting Machines with Rotary Indexing Hanger for surface preparation of Aluminum Dye Casted automobile engines parts.
The Casted Blocks are loaded one on each Rotary Indexing Hanger. After the Job is hanged on hanger, the hanger will index. Load second Job on out coming Hanger. After set time in PLC the Pneumatically operated Sliding Door get close. The blast cleaning media is propelled by centrifugal blasting wheels. Blast wheel stations are located strategically on the cabinet, fires media on the components. The components shot blasted are finished homogeneously all around. After a set time Front door will open. Job is unloaded and new Job cycle is repeated.
Machine Type
Indexing Hanger
- Technical Data
Blast Media would normally be round (cast or cylindricalshots). The smaller used media in this mixture is important for equal coverage of the surface being blasted while the coarser media is important to break up any scale.
|
S.No. |
Model Name |
Envelop Size |
Blast |
Load Carrying |
Wheel Size & |
Total Power |
1. |
ASH-1 |
600 x 750 |
2 |
300 |
121⁄2” X 5 |
14.5 |
|---|---|---|---|---|---|---|
|
2. |
ASH-2 |
600 x 1000 |
2 |
300 |
121⁄2” X 5 |
14.5 |
|
3. |
ASH-3 |
600 x 1000 |
2 |
300 |
121⁄2” X 7.5 |
22.5 |
|
4. |
ASH-4 |
750 x 750 |
2 |
300 |
121⁄2” X 5 |
14.5 |
|
5. |
ASH-5 |
750 x 750 |
2 |
300 |
121⁄2” X 7.5 |
22.5 |
|
6. |
ASH-6 |
750 x 1000 |
2 |
300 |
121⁄2” X 5 |
16.5 |
|
7. |
ASH-7 |
750 x 1000 |
2 |
300 |
121⁄2” X 7.5 |
22.5 |
|
8. |
ASH-8 |
1000 x 1200 |
2 |
300 |
121⁄2” X 7.5 |
23.5 |
- Technical Specification:
|
Description |
ASH |
ASH |
ASH |
ASH |
Envelop Size Dia |
1000mm |
1200mm |
1800mm |
2000mm |
|---|---|---|---|---|
|
No. of Blast Wheel |
2 |
3 |
4 |
4 / 5 |
|
Power of Blast Wheel |
15 / 20 HP |
15 / 20 HP |
15 / 20 HP |
20 / 25 HP |
|
Load Carrying Capacity of Hanger & |
500 |
500 |
2000 |
2000 |
|
R.P.M. of Hanger |
6 |
6 |
6 |
6 |
|
Blasting Cycle Time Per Hanger |
6-8 Min Approx |
6-8 Min Approx |
6-8 Min Approx |
6-8 Min Approx |
|
Type of Dust Collector |
Pleated Bag |
Pleated Bag |
Pleated Bag |
Pleated Bag |
|
Height of the Machine |
5000mm |
5700mm |
7500mm |
7900mm |
|
Type of Conveyor (As demand) |
‘Y’ Hanger / |
‘Y’ Hanger / |
‘Y’ Hanger / |
‘Y’ Hanger / |
|
Requirement of Pit |
No |
No |
No |
No |
- Use Cases
Industrial applications
Designed for precision blasting of repetitive production components where automation, consistency, and productivity are essential.
01
Designed for precision blasting of repetitive production components where automation, consistency, and productivity are essential.
02
Designed for precision blasting of repetitive production components where automation, consistency, and productivity are essential.
03
The multi-station indexing design allows loading and unloading while blasting is in progress, improving production efficiency and reducing cycle times.
- Automotive Components
- Gears & Shafts
- Camshafts
- Brake Shoes
- Valve Components
- Piston Heads
- Foundries & Forging Units
- Aerospace Components
- Cookware Manufacturing
- Precision Engineering Parts
- Surface Preparation Operations
- Production Finishing Lines
The machine is particularly suitable for medium-volume manufacturing environments requiring repeatable blasting quality and minimal operator intervention.
- The MEC SHOT Advantage
Why buyers choose us
End-to-end support from machine selection through commissioning and after-sales service.
Custom Engineering
Configurations tailored to your component size, material, and surface-finish targets.
Quality Tested
Pre-dispatch performance checks for blasting efficiency, safety, and reliability.
Export Ready
Documentation and logistics support for domestic and international shipments.
Dedicated Support
Technical guidance for installation, operation, spares, and maintenance.
- FAQs
Frequently asked questions
Answers about this machine, installation, and support.
A Roll Etching Machine is used to generate controlled surface roughness and matte finishes on industrial rolls through abrasive blasting.
The machine combines automatic roll rotation, nozzle reciprocation, and abrasive classification to maintain uniform blasting and stable Ra values.
The machine is equipped with 4 blast guns for efficient and uniform blasting.
The machine can process components up to 300 mm diameter.
Yes. The five-satellite indexing system automatically rotates components for complete blasting coverage.
Yes. The blasting system includes automatic abrasive recovery and recycling for continuous operation.
MEC SHOT provides installation support, operator training, maintenance assistance, technical guidance, and spare parts support throughout the machine lifecycle.
Need help choosing?
- +91-0291-2740609
- [email protected]
- Mon – Sat · 9:00 AM – 7:00 PM
- Similar Machines
Related products
Explore more machines from the same surface-preparation category.
Start Your Project with MEC SHOT
Share your requirements with our team and get expert guidance tailored to your industry and application.