Mobile Close Circuit Vacuum Blasting Machine Model Pb-10
Brief Working
The blasting is accomplished manually by holding the gun against the work surface, which is fairly straight. The equipment being closed circuit, the spent abrasive is sucked due to vacuum created and cycled into pressure generator after passing through the reclaimer unit. Thus, the used abrasive and dust created is contained within the equipment, keeping the blasting operation dust free.
Abrasive Capacity
150 Kg (Metallic) / 65 Kg (Sand)
Compressed Air Required
45 CFM @ 80 PSI
--- Technical Data
Complete equipment/ unit of Vacuum Blasting Machine with all accessories, all sub assemblies accommodated in two frame work provided with lifting lugs. The machine is suitable for blasting with chilled from grit G-02 to G-39 of BS-2451 and aluminium oxide 14/24 - 60/80. The machine is capable for reclamation (with vacuum pump of 15 HP) from 22.8 mtrs. Distance max. Single gun is provided with Supersonic Tungsten Carbide for non ferrous abrasive. Proper sieving arrangement with manual rapping of dust collector's filter bags provided with heavy duty moisture separator to arrest line condensation from compressed air entering into the equipment to keep abrasive dry and blast surfaces uncontaminated to the extent possible.
All the parts of systems are accommodated on two frame work with a lifting lug.
The air consumption of nozzle depends on size of nozzle used and pressure during machine operation.
|
TECHNICAL SPECIFICATION |
Model PB-10 |
Overall Dimensions mm Appx. |
1600 (L) X 2500 (W) X 3600 (H) |
|---|---|
|
Abrasive Tank Capacity |
112 Liters |
|
Blast Nozzle TC |
9.5 mm |
|
Blast Hose Dia & Length |
25 mm x 15 M |
|
Recovery System |
Vacuum Pump |
|
Reclaimer Type |
Cyclone & Vibrating Screen |
|
Dust Collector |
Cartridge Type |
|
Compressed Air Requirement |
7.5 M3 / Min at 6.33 Kg / sq. cm. |
|
Electrical Loading |
15 HP 415V / 3P / 50 Hz |
- * The size supplied unless other wise specified. All motors used are 415V/3P/50Hz. specifications are for guidance & subject to change without notice.
Export Ready
Documentation and logistics support for domestic and international shipments.
Dedicated Support
Technical guidance for installation, operation, spares, and maintenance.
Custom Engineering
Configurations tailored to your component size, material, and surface-finish targets.
Quality Tested
Pre-dispatch performance checks for blasting efficiency, safety, and reliability.
Need help choosing?
- +91-0291-2740609
- [email protected]
- Mon – Sat · 9:00 AM – 7:00 PM
- FAQs
Frequently asked questions
Answers about this machine, installation, and support.
The SUPER BLASTER (SB) is a suction-type abrasive blasting cabinet that works on the Induction-Suction principle. It is designed for continuous surface cleaning, deburring, matte finishing, and light shot peening applications.
The machine is widely used in heat treatment shops, tool rooms, die and mould manufacturing, fabrication units, automotive, aerospace, engineering workshops, and metal finishing industries.
The SUPER BLASTER is suitable for steel, stainless steel, aluminum, brass, cast iron, and other metal components, especially light and medium-sized parts requiring cleaning or surface preparation.
The integrated abrasive reclaimer automatically separates dust, debris, and broken abrasive particles, ensuring that only clean and properly sized abrasives are reused for consistent surface finishing.
It can efficiently perform rust removal, paint removal, scale cleaning, deburring, surface preparation before coating, and fine matte finishing with uniform results.
The SUPER BLASTER is available in SB-6060, SB-9182, and SB-12090, offering different working chamber sizes to suit various component dimensions and production requirements.
Yes. Optional accessories include rubber-lined cabinet walls, reverse-jet cartridge filter dust collector, higher-output blast gun, foot-operated treadle switch, and other customized configurations.
The machine uses an Induction-Suction abrasive feeding system, which provides smooth, continuous blasting without interruptions while minimizing abrasive consumption.
Yes. Its ergonomic cabinet design, viewing window, glove ports, and automatic abrasive recovery system make it easy to operate, maintain, and clean, reducing downtime.
Unlike many standard blasting cabinets, the SUPER BLASTER comes with a built-in abrasive reclaimer that delivers consistent blasting quality, reduced abrasive waste, lower operating costs, and improved productivity.
- Similar Machines
Related products
Explore more machines from the same surface-preparation category.
Start Your Project with MEC SHOT
Share your requirements with our team and get expert guidance tailored to your industry and application.